Paper Fidgets
Cool fidgets, just using paper! And tape! And ink! And scissors! And a printer!
Download
Step 1:
Cut out the rectangle with two short dashed lines.
Step 2:
Cut out the rectangle with "(G)" on the bottom.
Step 3:
Fold on the dashed lines so "(J)" is on the back, and the two "(G)"s are touching each other, and tape it.
Step 4:
Cut out the tiny rectangle with "(J)" on the bottom.
Step 5:
Tape the "(J)" on the little rectangle to the "(J)" on the big rectangle. Align the edge of the big rectangle to the shorter dotted line on the little rectangle.
Step 6:
Poke the rectangle with the two short dotted lines through the rectangle with a handle and a hole in it. Make the letters go where the handle is.
Step 7:
Cut out the big rectangle with a black square and a ton of letters on it.
Step 8:
Tape the slidey-thingie down. Align the letters.
Step 9:
Draw something! Then slide the thing using the handle and draw another thing!
Step 10:
Cut out the long rectangle with lots of dashed lines with "(C)" on the bottom.
Step 11:
Fold it as shown, but keep the letter on the bottom.
Step 12:
Tape it down with the tape facing away from the border.
Step 13:
Cut out the next rectangle.
Step 14:
Fold it the same way.
Step 15:
You're halfway there! Repeat for the other rectangle.
Step 16:
Tape the springy thingies down with the tape facing away from each other.
Step 17:
Cut out the rectangle that roughly matches the size of the slidey thingy's slidey part with nothing on the front.
Step 18:
Tape it to the two springy thingies.
Step 19:
Cut out the next rectangle. Again.
Step 20:
Fold on the dashed lines so the letter is on the bottom.
Step 21:
Tape it down so the tape is facing towards the black hole. Align the letters, and don't let the tape go on the black.
Step 22:
Puuuullllllll it down.
Step 23:
Cut out the black square.
Step 24:
Tape down the other rectangle on page 2. Make it go over the hole, and if the letter doesn't get covered, tape down another piece of paper to cover it.
Step 25:
Cut out the small rectangle with "(K)" on it.
Step 26:
Fold on the dashed line so the letter is on the bottom.
Step 27:
Tape it down as shown.
Step 28:
Repeat for the other ones.
You're done!
